四川11选5开奖结果

External Water Tank Self-cleaning Sterilizer

Basic function: ﹡Killing bacteria & legionella ﹡ Inhibiting algae growth ﹡ Preventing equipment pipeline corrosion ﹡Lowering turbidity ﹡ Reducing suspended matter, Fe & Mn content, yellow water and bad smell。

  • Scope of application:
    life water tank: 40-160m3
    fire water tank:80-300m3
  • Power: 550W/750W/1100W
  • Disinfection method: external ozone disinfection

Component: control box (ozone generator, controller, circulating water pump, jet device, etc.) and inlet & outlet pipe connections.     

Scope of application: secondary water supply high-level water tank, reservoir, clean water pond of waterworks, disinfection of water reuse, pool water treatment system, landscape water disinfection, beverage & food industries, sterilization & algae killing of fire water tank and small self-contained water source disinfection etc。

Working principle: ozone is a strong oxidizer whose oxygen atoms oxidize the cell walls of bacteria until puncture and kill them by the unsaturated bonds. Ozone has good decolorizing, oxidation and deodorizing functions, and no secondary residue or pollution occurs during the transformation to oxygen.

External Water Tank Self-cleaning Sterilizer Parameter 

Type

Voltage/Power

Suitable volume of life water tank(m³)

Suitable volume of fire water tank (m³)

Control box size(mm)

Package Size(mm)

Installation

WTS-10A

220V/300W

≤40

≤80

360*200*550

560*380*220

Built-in

WTS-10A

380V/750W

40-80

80-160

450*320*960

500*360*980

External

WTS-20A

380V/950W

80-120

160-240

450*320*960

500*360*980

External

WTS-30A

380V/1460W

120-160

240-300

500*320*960

500*360*981

External


紫外线消毒器|紫外线杀菌器|管道式紫外线消毒器|水箱自洁消毒器|水箱消毒器|自洁消毒器

Installation diagram  

Installation instructions :

1。Pool water is pumped by a built-in circulating pump in sterilizer, then disinfected by the pressure of the circulating pump and released to the inlet of the tank。

2.The shell has five layers of corrosion protection and thermal insulation, it can be installed outdoors and rain - proof & anti - freezing.

3。The installation should be as close as possible to the water tank and minimize water intake pipe and return pipe, but the water intake and water return inlet of the tank should be as far away as possible to prevent short circuit during water treatment。 The water intake is connected near the outlet pipe of water tank (pool)。

4.After treatment by the sterilizer, the water is returned to the top of the water tank (pool) which near the inlet. A water outlet can be opened at the top of the tank (pool) , the water return pipe can be inserted into the depth of ≧2/3H below the water surface.

5.The distance from the sterilizer to the wall of water tank (pool) should be ≧0.6m, the operating and maintenance space should be more than 0.5m before and after the sterilizer. The inlet and outlet pipes and sewage pipes shall be connected with movable joints, for maintenance. Sewage outfall shall be equipped with the necessary sewage pipe to connect to the drain.

6.PVC or stainless steel can be used as the material of these pipes.

7.Y-strainer should be installed on the water intake pipe to protect the circulating water pump in the sterilizer.

8。Fully automatic operation of microcomputer and no need for personal care when working normally。 It can automatically detect and shut off the power when there is no water to protect the water pump and electric machine。

四川11选5官网 辽宁11选5 四川11选5开奖结果 四川11选5 辽宁11选5 四川11选5开奖结果 四川11选5开奖结果 四川11选5 四川11选5 四川11选5